BFC8130_ within the field of explosion-proof lights _ within the field of explosion-proof floodlight 

 Overview of the Company's production of BFC8130_ Field explosion-proof lights _ within the field of explosion-proof floodlight, flammable and explosive safety for a variety of indoor work site, petrochemical plants, operations and offshore oil platforms, railway, iron and steel, fire, military, government departments, fixed lighting needs. 
 (Please inquire 0519 -82,236,809) 
 Performance characteristics 
 BFC8130 explosion-proof function: explosion-proof certification of the national authority, completely manufactured in accordance with national standards for explosion proof, can work in explosive hazardous areas safe and reliable. 

 BFC8130 energy-saving light effects: high-intensity discharge light source, light and soft, the color is good, with an average life of 10,000 hours. 

 BFC8130 professional design: fine structure of the design and surface sealed, durable, dust-proof anti-corrosion. 

 BFC8130 installation: pendant, ceiling and wall-mounted installation and easy operation. 

 Explosion-proof mark Ex d IIC T4 
 Rated voltage of 220VAC 
 Light Source Power 250W 
 Gas discharge lamp light source type / of HPS MH 
 Protection class IP65 
 Corrosion grade WF2 
 Dimensions φ272 × 465mm 
 Total weight of 8.3kg 



 Use 

 BFC8130 according to the lighting needs of the job site to determine the location and manner of the installation of lamps and ballasts, ballast contact distance and then press the lamps and ballasts to the distance of the 220V power contacts to prepare the corresponding length of three core cable (the distance over two meters can be used with the lamp is equipped with cable). 

 When the lamp to the ballast contact distance of more than 2 m, BFC8130 need to replace the three-core cable. Use a hex wrench to spin under the lamp housing six hex bolts to pull out the part of the lamp body, remove the lamp comes with three core cable, and then the original wiring connected by the three-core cable. 
 BFC8130 use a socket wrench unscrew the ballast cover fastening bolts, remove the lid, the lighting of three-core cable to the introduction of ballast cavity at one end by the introduction of devices in the ballast output, the red line The black line (blue line), yellow and green lines, respectively, received ballast 4,5,6-terminal, and then compression nut tightened. 

 BFC8130 will be prepared one end of the three core power cable through the introduction of the ballast input device, the introduction of ballast cavity, then the L line (FireWire), line (center line), ground, respectively, received ballast 1, 2 and 3 on the terminal and tighten the compression nut. 

 BFC8130 co ballast cover and tighten the fixing bolts, and finally the three-core cable the other end connected to 220V power supply proof requirements. 

 BFC8130 replace the bulb, the first cut off the power, check the hanging chain hung lights, and then use the hex wrench to spin six hex bolts on the cover, carefully light body part to the drop-down, so that the lamp body and lamp shell separation Unscrew the old bulb replaced with a new bulb. 

 Quality Assurance 

 This product BFC8130_ explosion-proof lights _ within the field of explosion-proof floodlights in strict accordance with ISO9001: 2000 international quality management system standards for quality control to ensure that product quality is higher than the national standards, and fully meet the design requirements, the date of purchase, 3 During the year, under the normal use of the product, any failure by the Company is responsible for maintenance-free. 
 Welcome new and old customers to inquire BFC8130_ field of explosion-proof lights _ within the field of explosion-proof floodlight.