The ocean Wang NFC9112 Tanghai NYF8002 
 Glare floodlights split the floodlights 

 The Company to production NFC9112 glare floodlight floodlighting is widely used in various types of devices, platforms, corridors, passageways and workshops, factories and other places. Split the design, installation, maintenance is more convenient and safe. 

 A performance: 
 NFC9112 high light efficiency, long-life gas discharge lamp as a light source, and advanced optical design and a special process to deal with, soft and uniform light, no glare, power factor> 0.90, the average life of 10,000 hours or more. 
 NFC9112 optimize the structural design and high-strength aluminum alloy case with anti-strong vibration and shock. 
 NFC9112 corrosion-resistant shell material and surface coating, to ensure that lighting does not corrode in the harsh environment, does not rust. 
 NFC9112 gently flip transparent to replace the lamp is very convenient. 
 NFC9112 light fixtures and electrical boxes for the split design, small size, light weight, compact structure, beautiful, simple and smooth shape. 
 NFC9112 poles, ceiling and boom variety of installation methods, which can meet the lighting needs of different environments. 

 Two use: 

 1, according to the circumstances at the scene and lighting needs, determine the installation location and proper installation of lamps and ballasts. Φ8 ~ 10mm three core cable and prepare the corresponding length of the distance of ballast to 220V power contacts. 
 2, determine good installation location, lamps and ballasts fixed. 
 3, with two fastening bolts on the sleeve wrench ballast cover, turn the ballast cover to one end of the lighting of three-core cable is introduced through the introduction of devices in the ballast output to the ballast device cavity, yellow-green line, blue line, brown line, respectively, received ballast 4,5,6 terminals, and then use the lead card three-core cable compression and then tighten the compression nut. 
 4, will be ready for the introduction of devices in the one end of the three-core cable input through the ballast tank, the introduction of ballast cavity, and then the L line, line, ground, respectively, received ballast 1,2 terminals on the 3rd, and three-core cable is pressed and then tighten the compression nut. 
 5, closing the ballast cover and tighten the solid bolt, and then three-core cable to the other end connected to the 220V power supply to achieve the lighting. 
 6, replace the lamp, the first cut off the power, loosen the lock nut of the lamp side of the tilting mechanism of the hinge to open the lamp, unscrew the old bulb and put the new bulb. 

 Three note: 

 A lighting installation and maintenance, must be cut off. 
 2, when used, the lamp surface temperature rise is a normal phenomenon; transparent center temperature is higher, not touch. 
 3, the lamp is suitable for the installation height of 4 to 6 meters, the maximum projected range Ф15 m. 
 4, if the lamps external flexible cable or cord is damaged, the line is to be replaced by the manufacturer or its service agent or a qualified person. 

 Four technical parameters: 

 Rated voltage: 220VAC 50Hz 

 Protection of enclosure: IP65 

 Rated Power: 35/70/150 of MH / HPS gas discharge lamp 

 Inlet thread: G3 / 4 

 The introduction of cable: φ8 ~ φ10 mm 

 Dimensions: Lamp: φ255 × 191mm ballast box: 234 × 196 × 93mm 

 Five quality assurance: 

 This product NFC9112 glare floodlights in strict accordance with ISO9001: 2000 international quality management system standard for quality control to ensure product quality is higher than the national standards, to fully meet the design requirements, the product of 3-year warranty, light protection one year, since the purchase three years from the date of any failure by the company responsible for maintenance-free product under normal use. 
 Glare floodlights split in NFC9112 floodlights so that our life different.