NFC9610 purple GL9080 
 High-power LED street lamp high power road lamp 

 The product of this company through CE and ROHS, FCC certification, the product of all the Company's production of the built-in constant current power supply warranty of two years, the LED light source ensure three years. Under normal conditions of use, quality assurance is based on the correct preservation of the product, installation, use and maintenance; caused due to improper installation, in violation of the product operating procedures, product damage, do not fall within the scope of this warranty; quality warranty period quality problems, the company will be selected during the warranty period, repair, exchange (parts) or replace the new product to be solved; more than the quality warranty period will be appropriate to receive the material and labor costs. Our production of LED lamp products in the industry, has four major advantages: 
 (1) single 1W LED light bulbs, light efficiency is very good; 
 Patented thermal processing technology to solve the technical difficulties of LED lights; 
 3 unique constant current source control technology, and effective control of the light source service life; 
 4, the secondary light distribution patented technology to achieve the best results of light. 
 Specifically: 
 U.S. imports of semi-chip package, a single 1W high power LED as a light source, color temperature 2700k-10000k color pure white, warm white, sun yellow three. White luminous flux 95Lm / W. 
 Light source the metal structure of the unipolar transistors, the base can be directly heat, light assembly of the PCB with aluminum sandwich panel, and then use the silicone thermal paste cooling aluminum cup, heat a large area of ??materials used in aluminum fixed aluminum cup The high thermal conductivity, and light shell space for heat dissipation, which will help heat conduction diffusion. 
 Voltage (AC85V-265V), to overcome the grid due to the ballast, noise pollution and light-induced instability, to avoid the stimulus to bring work to eye fatigue. The service life of 50,000 hours of LED light source, calculated in accordance with the lit 11-12 hours a day, the LED lights in the 12 years without replacement. 
 4 time with just the LED light source with light, it is put into the chip K-factor, the control of the packaging process, the deployment of the white balance and the LED Lens, optical design, the second with just refer to Division I by changing the LED the emitting angle, to improve light utilization coefficient. The lens and reflector cups and other accessories to improve the luminous efficiency. Light distribution curve picture shows the bat airfoil survey said perfect. 
 60w LED street lamp technical advantages: 
 Voltage: AC220V/DC12V/DC24V 
 Power: 60W 
 Color: white, warm white, sun yellow 
 Color Temperature: 2700k-10000k 
 Luminous flux: 95Lm / W (semi chip) 
 Beam angle: 60/120 
 Environmental Operating temperature: -20 ~ 55 oC 
 Protection class: IP65 
 Certificate: ISO CE the ROHS energy-saving 
 Number of test report: XDW-2007010078 
 Size: 600 * 600 * 300mm 
 Installation spacing :22-25m 
 Power Protection: overvoltage, overcurrent, short circuit 
 Surface hardness test ≥ 2H 
 Mounting height: 8.5m 
 Centre illumination: 40lux 

 Special technical requirements 
 LED street lighting electrical properties of the nominal rated supply voltage and rated frequency, the difference of the actual power consumption and power rating should not exceed 10%, the power factor of not less than 0.92. 
 2 Degree of protection LED street lamp protection grade A products should not be less than IP67; B grade should not be lower than IP66; C grade should not be IP65. 
 The average life expectancy of LED street lamp rated average life expectancy should not be less than 30000h. 
 The maximum temperature LED lights rated for a maximum temperature Tc values ??should not exceed 58 ℃. 
 Maximum heat sink temperature lamps, LED tube heat sink temperature should not exceed 65 ℃. 6 The main optical parameters 
 7 immunity surge suppression performance (anti-thunder) voltage level of protection should not be less than 2kV (line - line) and 4kV (line - ground). 
 8 with the characteristics of lamps in the light part of the LED bulbs goes out or the whole light dimming, spot shape and surface illumination uniformity should not change significantly 

 Streets, roads, residential, school, factory, plaza, park lighting.