NJC9500 KH211-hui NXW8230 
 Dustproof and waterproof zoom Zoom lamp explosion-proof lights gas discharge Spotlights 
 Stations, docks, squares, construction, special machinery, and other venues and facilities for lighting, can also be used in the urban landscape, and building facades for landscape lighting. 
 1 Features: 
 Efficient MH gas discharge light source, the average life of 10,000 hours or more. Both cast light floodlight lighting function can easily convert, and adjust the lighting angle in the up and down the larger context of concentrating irradiation distance of up to 150m. Multiple shock structure design, excellent seismic performance can be reliably used in a variety of high-frequency vibration environment. Light alloy materials and high-tech environmentally friendly coating technology, dustproof and waterproof, corrosion-resistant rust-proof, suitable for use in outdoor long-term work. Good electromagnetic compatibility, and will not interfere with the transmission network. Pedestal, wall, ceiling and other variety of installation methods can be arbitrarily chosen, and easy operation. 
 2 Use the method: 
 1, according to the needs of the environment of the scene to determine the appropriate installation location and manner lamps with expansion bolts for mounting. 
 2, open electrical boxes on the back of the terminal box cover with a screwdriver spin Songge Lan connector, one end of the cable through Ruge Lan connector, in accordance with the polarity indicated on the junction box to the zero line, the line of fire, and ground, respectively, then the corresponding the terminal, tighten the the Gülen connector fixed junction box cover, and then cable the other side of the access to 220V power. 
 Loosen the lamp bracket at one end of the lamp locking screws can be adjusted up and down a wide range of lamp illumination angle; turn the dimmer knob to achieve the free conversion of the condenser and the floodlight. 
 Dimming knob, fine-tuning can improve the effect of the spotlight, floodlight and used needle nose pliers into the two hole within the fine-tuning nut, tighten the fixing about to. 
 Replace the lamp with a screwdriver and loosen the lamp shell cover fixed screw to remove the lamp holder, and then will put a new lamp can be fixed on the back cover together. 
 3 Technical parameters: 
 Power: 70/150W 
 Rated voltage: 220VAC 50Hz 
 Protection of enclosure: IP65 
 Inlet thread: G3 / 4 
 The introduction of cable: φ6 ~ φ14mm 
 Dimensions: 210 × 206 × 350mm 

 Note: 
 A lighting installation and maintenance, you must first disconnect the power. 
 2, non-professionals may not disassemble lamp. 
 3, the lamps must have a reliable ground. 
 4, replace the lamp, not bare hands grasping bulb glass bulb to avoid damage to the bulb. 

 4 Quality Assurance: 
 This product is in strict accordance with ISO9001: 2000 international quality management system standard for quality control to ensure product quality is higher than the national standard, and fully meet the design requirements, the product of seven-year warranty (one year lamp warranty), and seven years from the date of purchase the product under normal use, any failure by the company responsible for maintenance free.