NLC9600 road dust of light corrosion road lights road lights gas discharge lamp pole horse street lamp longevity road lights 
 Produced by road light "NLC9600, widely used in factory roads, at all levels of roads, urban trunk road and other places for road lighting. Welcome to the new and old customers to inquire negotiations. 


 Performance: 
 Adopt NLC9600 high light efficiency, long-life gas discharge lamp as the light source, the choice of the imports of 99.99% high purity aluminum reflector and adopted to optimize the optical design, high efficiency lighting, illumination angle, through the fog and strong, uniform illumination, power factor> 0.90 life of up to 50,000 hours, to meet the requirements of the road dispersed lighting. Breathing apparatus to prevent dust from entering the light chamber, effectively reducing the temperature of the light source chamber, and extend the source life. Transparent the use of special high-borosilicate glass, high transmittance, shock and heat of the dramatic changes in performance, to ensure the normal working of the lamps in harsh environments. Road lights 
 NLC9600 shell selection of light alloy materials by the high-tech spray technology treatment, no corrosion, no rust, can be used in outdoor harsh environments and long-term. Humane openings, install, easy to maintain. Capitals and lateral two installation methods may be suitable for φ45 ~ 75mm variety of diameter of the poles supporting the installation, and site lighting requirements, and adjust the lighting angle within the range of -5 ° to +5 °. Note: a, transport, road lights 
 NLC9600 fixed with the wrapping paper box, to prevent the break up. 2, when used, the lamp surface temperature rise is a normal phenomenon; transparent center temperature is higher, not touch. 3, replace the lamp, try to use the same types of light bulbs; If you change the bulb type or power, should be a corresponding replacement of the supporting ballast. 4, the only lighting in the outdoor use; complete zone of the lamps can only be a protective screen to use. 5, cross-sectional area of ??the external wiring can not be less than 1.5mm, the use of: 1, according to the installation site of the actual lighting needs, determine the appropriate lighting installation (capitals and lateral), adjusting the mounting bracket. And then press the distance of the lamps to the power contacts to prepare the corresponding length of the three-core cable. Hand Bankai the road light "NLC9600," the front of the buckle, and opened the lamp cover, the cable through the lighting the rear of the cable into the hole to introduce light cavity connected to the polarity of the wiring within the luminaire base marked cable (FireWire then "L" position, the zero line then the "N" bit, the ground wire to the pick position), then the cable line with wire tablet compression. 3, the poles will be inserted into the mounting bracket into the hole, according to the lighting point of view, the poles take the appropriate gear on the stent cylinder bolts matter compression poles poles and road lights NLC9600 securely connected. 

 Technical parameters: 
 Rated power 250W/400W 
 Rated voltage of 220VAC 50Hz 
 Gas discharge lamp light source type / of HPS MH 
 Enclosure protection IP65 
 Corrosion grade WF2 
 From the high 0.6/0.9 
 Dimensions φ780 * 350 * 280 
 Total weight of 14.5kg 


 Quality assurance: the lighting production in Europe-hui the road light "NLC9600," in strict accordance with ISO9001: 2000 international quality management system standards for quality control to ensure product quality is higher than the national standards, to fully meet the design requirements, the product of 3-year warranty and lamp warranty year, three years from the date of purchase the product under normal use and any failure by the company responsible for maintenance-free.